Custom Shower Doors For Rochester Hills
Our showroom sits at 42624 Van Dyke Ave in Sterling Heights, a short drive southeast of Rochester Hills. We measure, build, and install frameless, sliding, and swing glass shower enclosures, all done by our own family crew.
Glass Made To Fit Your Bath
Rochester Hills covers a lot of ground, from the established homes along Tienken and Avon to the newer subdivisions tucked off Rochester and Adams. We work in all of it, bringing 3/8" tempered glass that is cut and finished for the exact opening in your bathroom rather than pulled off a shelf. Nothing about your space is standard, so nothing we install is either.
Whether you are updating a primary bath in a longtime family home near downtown or finishing a new build closer to the county line, the goal is the same: a clean, durable enclosure that suits the room. You choose the look, we handle the precise part, and the same people who measure are the ones who set the glass.
Big rooms, and the ones nobody sees.
Rochester Hills covers a lot of ground, from the established homes along Tienken and Avon to the newer subdivisions tucked off Rochester and Adams. The primary baths here tend to be generous, and generous is where frameless glass earns its keep: if you have invested in a wide walk-in with real tile work, a bulky frame is the one thing that will make it look ordinary.
But even in the larger homes, not every bathroom is a sprawling suite. The compact hall bath and the guest bath are usually where the floor plan ran out of room, and those are the openings where a sliding panel or a well-placed hinged door does more for daily life than anything else in the project.
The other constant here is water. Oakland County runs hard, and hard water is patient. It leaves film, then spotting, then etching that no cleaner reverses. That is worth planning for while you are still choosing glass, not after.
- Larger primary baths in wooded, rolling subdivisions
- Established homes near Tienken and Avon with older openings
- Newer construction off Rochester and Adams with wide walk-ins
- Compact hall and guest baths where every inch of floor counts
Three Ways To Enclose
Frameless
Heavy 3/8" tempered glass held by minimal hardware for an open, architectural feel that suits both renovated older baths and modern new construction.
Sliding (Barn-Style)
Glass panels that glide on an exposed track, a practical fit for tubs and tighter layouts where a swinging door would crowd the room.
Swing (Hinged)
A classic hinged door that opens wide, ideal for walk-in showers where you want a simple, solid entry and an uncluttered line.
Rochester Hills at a glance.
Measured And Installed In-House
A project starts with a free, no-pressure measure at your home. We take down the real numbers, talk through what works for your shower, and let you handle the glass and hardware before anything is ordered. There is no guessing and no charge to find out what fits.
From there, our family fabricates your enclosure and our own installers set it. Because we do not sub-contract the glass work, the person who measured your opening is the person standing behind the finished result. Most Rochester Hills installs go from measure to install in a couple of weeks, depending on your selections.
- Free in-home measure
- Hardware: matte black, gold, chrome, nickel
- Glass: clear or low-iron ultra-clear
- Satin frosted or rain-textured options
- 3/8" tempered glass throughout
- Same family measures and installs
Matching the glass to the room.
For a generous primary shower, frameless shower doors in Rochester Hills give you an uninterrupted wall of glass and let the stone and tile stand on their own. If the shower steps out at an angle, wraps a corner, or runs long with a fixed panel beside the door, that is a custom glass enclosure built around the actual configuration.
In the compact rooms, sliding and bypass doors keep the floor clear, which is the whole point when a vanity sits close to the tub. Semi-frameless glass is the middle path when you want most of the open look while keeping a slim frame where it helps the door stay true.
If the glass is etched, the frame has started to pit, or the door no longer closes square, chasing parts is money spent on an old problem. Replacement puts new custom glass in the opening you already have, and in most Rochester Hills homes the tile never gets touched.
A short drive southeast.
Our showroom is at 42624 Van Dyke Ave in Sterling Heights, a short drive southeast of Rochester Hills, and we bring the free measure to you. There is no pressure at that visit and nothing gets ordered from it until you are ready.
Whether you are updating a primary bath in a longtime family home or finishing a new build closer to the county line, the goal is the same: a clean, durable enclosure that suits the room and was cut for your walls rather than trimmed from stock.
Around Rochester Hills.
We cover Rochester Hills as part of a tight Oakland County service area rather than a map with pins scattered across the state. The closest cities to you that we also serve are Rochester, Troy, Auburn Hills and Oakland Township.
Everything runs out of one showroom, which is the point: the same family measures in Rochester Hills, fabricates the glass in our own shop and installs it, whichever city the job is in. The full list of communities we cover is on the service area page, and if you do not see yours, call the showroom and ask.
Common questions.
Do you serve Rochester Hills?
Yes. Rochester Hills is a short drive northwest of our Sterling Heights showroom, and we install throughout the area regularly. The measure and the install both happen at your home.
What does a custom shower door cost?
Price depends on the size of the opening, the enclosure style, the glass you pick, and the hardware finish. We give you a clear quote after the free in-home measure, with no obligation to move forward.
How long does the whole process take?
After we measure and you choose your glass and metal, we fabricate the enclosure and schedule the install. Most projects run a couple of weeks from measure to finished install, depending on your selections.
Do you install, or only supply the glass?
We do both, and we keep it under one roof. Our family measures, fabricates, and installs every enclosure with no sub-contracted glass, so one team owns the job start to finish.
How far in advance should I plan?
Come to the measure with your tile and fixture decisions as settled as you can get them, since glass is cut to the finished opening. We will give you a realistic timeline for your selections at that visit rather than a number over the phone.
Will hard water ruin the glass?
It will mark it if nothing stands in the way. Oakland County water is hard, so ask about an easy-clean coating while we are measuring. Once mineral etching sets into bare glass, no cleaner brings it back.
My shower is not a rectangle. Can you still do it?
That is normal here. Corners, neo-angles, inline door and panel runs and open walk-ins are all built to the real shape of the room rather than to a stock size.
Do you subcontract the installation?
No. The same family measures, fabricates and installs, so there is one line of accountability from the first visit to the last.
Should I choose low-iron glass?
It is worth seeing side by side. Standard clear glass carries a slight green cast at the edges, and low-iron reads truer against white tile and light stone. In a large primary shower the difference is easy to notice.
Do you work with our builder or contractor?
Regularly. On new construction we coordinate the measure with the tile schedule, since glass is cut to the finished opening and measuring too early is the most common way a job goes wrong.
Let's Measure Your Shower
Reach out to set up a free, no-pressure measure and see what fits your Rochester Hills bathroom.